Avaya 4600 Series IP Telephones Note d'application télécharger pdf (Page 11)

SZ; Reviewed:

WCH 11/24/2004

Solution & Interoperability Test Lab Application Notes

11 of 23

Aruba-wireless.doc

5. Configure the Avaya S8500 Media Server with the Avaya

G650 Media Gateway

This section describes the steps necessary to configure the Avaya S8500 Media Server with a

G650 Media Gateway.

5.1. Configuring the Ethernet Interfaces of the Avaya S8500 Media

Servers

The Avaya S8500 Media Server is configured using a web interface. To access the web interface,

connect a computer’s Ethernet interface to the services port of the Avaya S8500 Media Server

with a crossover Ethernet cable. The services port uses the pre-configured IP address 192.11.13.6

with mask 255.255.255.252. Configure the computer’s IP address as 192.11.13.5 with mask

255.255.255.252. Connect the computer’s Ethernet interface to the services port with a crossover

Ethernet cable. Launch a web browser with the URL

http://192.11.13.6. After logging in, click

Launch Maintenance Web Interface to get to the main menu on the left hand side. Click

Configure Server from the lower left of this main menu.

The Avaya S8500 Media Server has two IP interfaces. Ethernet 1 is used for the control network

to communicate with the IPSI circuit pack of the Avaya G650 Media Gateway. Ethernet 2 is

dedicated to the services port.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 22 23

Pas de commentaire

Avaya 4600 Series IP Telephones Note d'application Page 11