Avaya R2 Guide de l'utilisateur télécharger pdf (Page 21)

Introduction

1-6 Operating Environment

Operating Environment 1

To install BCMS Vu Software R2, you must have at least the following

hardware and software:

For the

BCMS Vu

Server PC 1

❐ A single-processor Pentium.

❐ Windows 95 (for a Server with one Client attached) or Windows NT 4.0

Server or Workstation (for a Server with more than one Client attached)

with Service Pack 3 installed on the PC.

❐ 64 MB of main memory.

❐ Up to 500 MB (512,000 KB) of disk space

❐ A double-speed CD-ROM drive.

❐ One serial port to connect to the DEFINITY system through a data

module. This serial port must be an external port.

❐ You may need other unused serial ports:

— One to connect to a wallboard. This serial port must be an external

port.

— One for remote maintenance if you are using an external modem.

*For splits/skills, agents, VDNs and trunk groups measured by BCMS, the following

formula is an approximate guide to the space required in megabytes for each

day’s

historical data when the interval measured is an hour. (When the interval is a half-hour, use

185 instead of 370 in the formula.)

# splits/skills + # agents + # trunk groups + #VDNs

(370) * BCMS interval in hours

Note

If you install the software from a remote network drive, the

machine on which the software is installed (either Server,

Client, or Wallboard) does not need a CD-ROM drive.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 259 260

Pas de commentaire

Avaya R2 Guide de l'utilisateur Page 21