Avaya Configuring Traffic Filters and Protocol Prioritization Manuel d'utilisateur télécharger pdf (Page 126)

Configuring Traffic Filters and Protocol Prioritization

7-8

Figure 7-6. Add Range Window

Specify the low and high values for the range you want to apply to the

selected criterion.

If the range you want consists of just one value, specify that value in both

boxes. Zero is not a valid entry for Minimum or Maximum value.

8. Click on OK.

The Create Priority/Outbound Template window reappears (refer to

Figure 7-5). The new criterion and range appear in the Filter Information

scroll box.

9. Add additional ranges if you want.

You can add up to 100 ranges for each ﬁlter criterion.

10. Select Action, and either IP or Datalink.

11. Select Add Action; then select the action you want to impose on packets

that match any of this template’s ranges of ﬁltering criteria.

Note: When you enter values for the Minimum and Maximum value

paramters, the Conﬁguration Manager assumes the value is a decimal number.

To enter a hexadecimal number, use the preﬁx 0x.

1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 161 162

Pas de commentaire

Avaya Configuring Traffic Filters and Protocol Prioritization Manuel d'utilisateur Page 126