Avaya Configuring IP, ARP, RIP, and OSPF Services Manuel d'utilisateur télécharger pdf (Page 147)

100

101

Customizing RIP Services

117356-E Rev 00

5-17

Listening for a Default Route

By default, RIP ignores inbound advertisements of a default route (0.0.0.0) on the

interfaces where it is configured. You can use the BCC or Site Manager to

configure RIP to listen for a default route and add that information to its internal

routing table.

Using the BCC

To specify whether RIP listens for the default route, navigate to a RIP interface

prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

default-listen

action

is one of the following:

enabled

disabled

(default)

For example, the following command causes RIP to listen for a default route on IP

interface 2.2.2.2:

rip/2.2.2.2#

default-listen enabled

rip/2.2.2.2#

Using Site Manager

To specify whether RIP listens for the default route, complete the following tasks:

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

RIP Interfaces

. The IP RIP Interface Configuration

window opens.

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear in the IP RIP Interface

Configuration window.

(continued)

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 361 362

Commentaires sur ces manuels

Pas de commentaire

Avaya Configuring IP, ARP, RIP, and OSPF Services Manuel d'utilisateur Page 147

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Avaya Configuring IP, ARP, RIP, and OSPF Services