Avaya Configuring IP, ARP, RIP, and OSPF Services Manuel d'utilisateur télécharger pdf (Page 127)

Configuring Address Resolution

117356-E Rev 00

4-9

Using Site Manager

To enable or disable Proxy ARP, complete the following tasks:

Timing Out Entries in the Address Resolution Cache

IP maintains an address-resolution cache on each interface that is configured with

ARP or Proxy ARP. The address-resolution cache contains host physical

addresses learned by means of ARP or Proxy ARP.

If you enable the cache timeout feature on this interface, the IP router removes

address-resolution cache entries after the specified aging period has elapsed. After

an entry is removed, the IP router must use ARP to reacquire the physical layer

address.

By default, the cache timeout feature is disabled on the interface. You can use the

BCC or Site Manager to enable the feature and to specify a timeout interval in

seconds.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

Interfaces

. The IP Interface List window opens.

4. Click on the interface that you want to edit. Site Manager displays the parameter

values for that interface in the IP Interface

List window.

5. Set the

Proxy

parameter. Click on

Help

see the parameter description on page

A-9

6. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 361 362

Pas de commentaire

Avaya Configuring IP, ARP, RIP, and OSPF Services Manuel d'utilisateur Page 127