
Customizing TFTP Services
304234-A Rev 00
5-3
Using Site Manager
To disable and reenable TFTP services, perform the following actions:
Specifying the Default Volume for the Router
When you configure a router, you must specify which of the router’s slots will be
used, by default, for all TFTP GETs and PUTs.
Using the BCC
By default, the slot on which TFTP runs on the router is slot 2. If you are
configuring an AN
®
router, you must specify slot 1.
To specify the slot on which TFTP runs, navigate to the TFTP prompt and enter:
default-volume
<
slot
>
slot
is an integer in the range 1 to 14, 1a to 4a, or 1b to 4b.
For example, the following command line sets the default volume on which TFTP
runs to 3:
tftp# default-volume 3
tftp#
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
TFTP
. The Edit TFTP Parameters window
opens.
4. Set the
Enable
parameter. Click on
Help
or see the parameter description on
page A-7
.
The field is selected.
5. Click on
OK
. You return to the Configuration Manager
window.
Commentaires sur ces manuels