Avaya Configuring IP Utilities Manuel d'utilisateur Page 223

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 228
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 222
Configuring IP Global Access Policies
304234-A Rev 00
D-5
For example, the following command specifies FTP as the IP utility controlled by
policy_1:
access-policy/policy_1# service ftp
access-policy/policy_1#
Specifying the Precedence
The precedence parameter specifies the precedence of this policy relative to other
global IP access policies. There is no default for this parameter.
To set the precedence parameter for a global IP access policy, navigate to the
policy-specific prompt and enter:
precedence
<
precedence>
precedence
is an integer.
For example, the following command sets the precedence parameter to 5:
access-policy/policy_1# precedence 5
access-policy/policy_1#
Global IP Access Policy Example
The following command sequence creates a global access policy called no-telnet:
ip# access-policy polname no-telnet
access-policy/no-telnet# network 192.32.150.0/255.255.255.0
network/no-telnet/192.32.150.0/255.255.255.0# info
on access-policy/no-telnet
state enabled
address 192.32.150.0
mask 255.255.255.0
network/no-telnet/192.32.150.0/255.255.255.0# back
access-policy/no-telnet# info
on ip
state enabled
action deny
log on
service telnet
precedence 0
polname no-telnet
access-policy/no-telnet#
Vue de la page 222

Commentaires sur ces manuels

Pas de commentaire