Avaya Configuring IP Services Manuel d'utilisateur Page 393

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 415
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 392
Import and Export Route Filters
114065 Rev. A C-25
Parameter: Export From Protocol
Path: Configuration Manager > Protocols > IP > Route Filters > EGP > Export
Filters
Default: Any
Options: Any
| RIP | EGP | OSPF | Direct | Static | BGP-3
Function: Identifies the source of the routing information: direct connection, static route,
or RIP-, EGP-, OSPF-, or BGP-3-derived route.
Instructions: Select the appropriate option.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.13.1.5
Parameter: Export Peer
Path: Configuration Manager > Protocols > IP > Route Filters > EGP > Export Filters
Default: 0.0.0.0
Options: Any IP address
Function: Specifies the IP address of the interface on the remote side of this EGP peer
connection. This filter will apply to updates from this router. The default value
0.0.0.0 means “any” router.
Instructions: Enter the IP address in dotted decimal notation. The address must be on the
same subnet as a local interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.13.1.7
Parameter: Export OSPF Type
Path: Configuration Manager > Protocols > IP > Route Filters > EGP > Export
Filters
Default: None
Options: Type 1
| Type 2 | Internal
Function: Specifies the type of routes to which this filter applies. If you specify Type 1,
then only AS External Type 1 routes are filtered. If you specify Type 2, then
only AS External Type 2 routes are filtered. Note that this parameter is only
used if the Export From Protocol parameter is set to OSPF.
Instructions: Depending on the type of routes you want to filter, select Type 1, Type 2, or
Internal.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.13.1.8
Vue de la page 392
1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 414 415

Commentaires sur ces manuels

Pas de commentaire