Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manuel d'utilisateur télécharger pdf (Page 76)

Configuring SNMP, BOOTP, DHCP, and RARP Services

2-14

Parameter: Output IP Address

Default: None

Options: Any valid IP address

Function: Speciﬁes the IP interface that forwards BOOTREQUEST packets to an

external network.

Instructions: Enter the IP address of a numbered network interface that you want to

transmit BOOTREQUEST or DHCP packets to servers, then conﬁgure

this IP address on the router, if you have not already done so.

Do not specify an unnumbered interface for this parameter. If you want to

use an unnumbered interface to transmit BOOTREQUEST or DHCP

packets to servers, you must set up a preferred server from the BOOTP

Relay Agent Interface Table window.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.4

Parameter: Enable/Disable

Default: Enable

Options: Enable

| Disable

Function: Speciﬁes whether this forwarding route is active.

Instructions: Select Enable to allow BOOTP or DHCP forwarding through this route.

Select Disable to prevent BOOTP or DHCP forwarding through this

route.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.2

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 107 108

Pas de commentaire

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manuel d'utilisateur Page 76