Avaya Configuring IP Multicasting and Multimedia Services Manuel d'utilisateur Page 29

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 234
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 28
Starting Multicasting and Multimedia Services
303527-A Rev. 00
2-3
Starting DVMRP
To start DVMRP on the router:
1.
Configure a circuit on a slot and connector.
2.
Configure an IP interface on the circuit.
3.
Add DVMRP to the IP interface.
For information and instructions on using Site Manager to configure a circuit on a
slot and connector, see Configuring WAN Line Services or Configuring Ethernet,
FDDI, and Token Ring Services. When you have successfully configured the
circuit, the Select Protocols window opens. Proceed as follows:
When you configure DVMRP on an IP interface, DVMRP is also configured
globally on the router.
DVMRP is now running on the router with default values for all global and
interface parameters. You customize DVMRP by modifying DVMRP parameters.
For information and instructions, see Chapter 4
.
Site Manager Procedure
You do this System responds
1. In the Select Protocols window, choose
the following protocols:
IP
DVMRP
Then click on
OK
.
The IP Configuration window opens.
2. Set the following parameters:
IP Address
Subnet Mask
Transmit Bcast Addr
UnNumbered Assoc Address
Click on
Help
or see the parameter
descriptions beginning on page A-23.
3. Click on
OK
. Site Manager returns you to the
Configuration Manager window.
Vue de la page 28
1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 233 234

Commentaires sur ces manuels

Pas de commentaire