Avaya Configuring IP Multicasting and Multimedia Services Manuel d'utilisateur télécharger pdf (Page 127)

Configuring RSVP

303527-A Rev. 00

7-7

Configuring RSVP on an Interface

When you add RSVP to an IP interface, RSVP is configured on the interface with

default values for all interface parameters. You customize RSVP on the interface

by setting interface parameters as described under the following topics:

Disabling and Reenabling RSVP on an Interface

By default, RSVP is enabled on every interface on which it is configured. You can

use Site Manager to change the state of RSVP on an interface as required.

Topic Page

Disabling and Reenabling RSVP on an Interface

7-7

Setting the RSVP Default Refresh Timer 7-8

Setting the RSVP Default Lifetime Multiplier 7-9

Setting the RSVP Refresh Blockade Multiplier 7-10

Setting the TTL Override 7-11

Setting the Route Delay Value 7-12

Enabling and Disabling UDP Encapsulation 7-13

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

RSVP Circuit

. The Edit RSVP Circuit Parameters

window opens.

4. Set the

Enable

parameter. Site Manager:

Enable parameter: page A-37

5. Click on

Apply

, and then click on

Done

. You return to the Configuration Manager

window.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 233 234

Pas de commentaire

Avaya Configuring IP Multicasting and Multimedia Services Manuel d'utilisateur Page 127