Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manuel d'utilisateur télécharger pdf (Page 90)

Configuring SNMP, BootP, DHCP, and RARP Services

4-4

303542-A Rev 00

To specify a minimum timeout value, complete the tasks in the following table.

Specifying the Relay Mode for Packet Forwarding

BootP and DHCP use the BootP relay agent to forward packets. You can allow the

BootP relay agent to forward BootP, DHCP packets, or both by specifying the

Pass Through Mode parameter. The default setting is BootP, which allows the

interface to transmit only BootP packets. Be sure to change the setting if you want

to transmit DHCP packets.

To set the relay mode on a BootP interface, complete the tasks in the following

table.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

3. Choose

BOOTP

. The BOOTP menu opens.

4. Choose

Relay Agent Interface Table

. The BOOTP Relay Agent Interface Table

window opens. This window lists all the IP

interfaces that you have configured for

BOOTP services on the router.

5. Set the

Timeout Secs.

parameter.

Click on

Help

or see the parameter

description on page A-17

6. Click on

Apply

7. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Protocols

The Protocols menu opens.

2. Choose

. The IP menu opens.

(continued)

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 145 146

Commentaires sur ces manuels

Pas de commentaire

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manuel d'utilisateur Page 90

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services