Avaya Reference for BCC IP show Commands Manuel d'utilisateur télécharger pdf (Page 67)

OSPF show Commands

308603-14.00 Rev 00

7-3

show ospf base

The

show ospf base

command displays global information for the OSPF router.

The base record controls OSPF for the entire router. The output includes the

following information:

show ospf interface

The

show ospf interface

command displays a table of OSPF interfaces followed

by a table of OSPF virtual interfaces. The output includes the following

information:

Router ID Router identifier, which is unique among all OSPF

routers.

State Whether the OSPF protocol is enabled or disabled on the

router.

Area Border Router Whether the router is an area border router. Valid values

are true or false.

AS Boundary Router Whether the router is an autonomous system boundary

router. Valid values are true or false.

NSSA Border Router Whether the router is an NSSA border router. Valid values

are yes or no.

Slot Running Primary The slot on which the OSPF soloist is running.

Slot Running Backup The slot on which the backup OSPF soloist is running.

OSPF Interfaces

IP Address IP address of the OSPF interface.

Area ID Area identifier of the interface.

Interface Type Type of interface link, as follows:

• PtoP - Point-to-point interface

• BCAST - Broadcast network

• NBMA - Nonbroadcast multiaccess network

• DFLT - Not configured appropriately

• P to MPs - point-to-multipoint proprietary

• IETF - point-to-multipoint standard

• PASSIVE - passive interface

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 75 76

Pas de commentaire

Avaya Reference for BCC IP show Commands Manuel d'utilisateur Page 67