Avaya Configuring VRRP Services Manuel d'utilisateur télécharger pdf (Page 32)

Configuring VRRP Services

A-4

304138-A Rev 00

Parameter: Virtual RouterIP Address

Path: Configuration Manager > Select Protocols > IP > VRRP

Default: None

Options: Any valid IP address in dotted-decimal notation.

Function: Identifies the IP address of the interface that the virtual router backs up.

Instructions: Enter the IP address that you want the virtual router to back up. Ensure that the

primary IP address and the virtual router IP address are on the same subnet. If

the virtual router IP address is the same as the primary IP address, you should

set the priority to 255 and then this VRRP router, when operating, will always

be the master virtual router.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.25.1.1.6

Parameter: Priority

Path: Configuration Manager > Select Protocols > IP > VRRP

Default: 100

Options: 1 to 255

Function: Specifies the priority of the virtual router with respect to all virtual routers on

the IP interface.

Instructions: Enter a priority from 1 to 254. The higher the value you specify, the higher the

priority of the virtual router. Site Manager automatically supplies a priority of

100 for all backup virtual routers. If you set the primary IP address to the IP

address of the physical interface, Site Manager sets the priority to 255.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.25.1.1.8

Parameter: Advertisement Interval

Path: Configuration Manager > Select Protocols > IP > VRRP

Default: 1

Options: 1 to 255 seconds

Function: The interval, in seconds, between the transmission of VRRP advertisements

from the primary virtual router.

Instructions: Enter a value from 1 to 255 seconds.

MIB Object ID: 1.3.6.1.4.1.18.3.5.53.25.1.1.9

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 38

Pas de commentaire

Avaya Configuring VRRP Services Manuel d'utilisateur Page 32