Avaya R2MFC Guide de configuration télécharger pdf (Page 64)

64 Chapter 5 R2MFC MBM maintenance

N0027684 01

1 Copy the firmware load file and the PC program files, bload1.exe, to the same directory on the

PC.

2 Use the shipped cable, part number N0026100, to connect a PC to the RS-232 port on the

faceplate of the R2MFC MBM through COM1.

3 Open a new Hyper-terminal session on the PC using the parameters listed in Table 14.:

4 Go to step 11 if the existing firmware is corrupted. Corrupted firmware is indicated if the

BOOT program displays:

load, switch, fload, fswitch, checksum, DisMem, DisWord, *=quit

----> user monitor:

5 Wait for the monitor line (flashing cursor) to appear on the terminal session.

6 Go to step 8 if the BCM is not active and no calls are running. If calls are running, access the

Control directory.

7 Execute the soft disable (LSD), or immediate disable (LID), to disable the links.

8 Enter the load subdirectory.

9 Execute load y command.

10 Wait for the output of the boot monitor.

11 Enter fload to prepare the MBM for the uploading of firmware.

The R2MFC MBM will not respond while it is waiting for a download.

12 Release the COM port by closing the Hyper-terminal session.

13 Run the download programs on the PC through the Start > run menu:

•//file path/Bload1 <load_file>

The program responds: starting rec 0. Hit any key to continue...

14 Press <Enter>. The program starts the download, and shows its progress by displaying the

number of processed records.

When finished, the program prints: Download ended successfully!

Table 14 Hyper-terminal setup parameters

Parameter Setting

Connect using COM 1

Bits per second 19 200

Data bits 8

Parity None

Stop Bits 1

Flow Control None

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 105 106

Pas de commentaire

Avaya R2MFC Guide de configuration Page 64