Avaya R2MFC Guide de configuration télécharger pdf (Page 46)

46 Chapter 4 Configuring the R2MFC MBM

N0027684 01

Figure 15 Config DIP switch layout

3 Power up, or restart, the R2MFC MBM.

Creating a customized country code

If the R2MFC MBM required settings are not identical to any country code, customization can be

performed using the CLI through the serial port. Perform the following steps for configuring the

customized country codes:

1 Set the Config DIP switches to match the country code closest to customer requirements. See

Appendix A, “Config DIP switch settings and definitions,” on page 85.

2 Power up or restart the BCM.

3 Make the required modifications by CLI. See Chapter 6, “Command Line Interface (CLI),” on

page 67 for an explanation of how to access and navigate the CLI.

• Configuration changes made through the CLI immediately affect the operating parameters

in RAM.

• Use the SaveCfg - (save configuration permanently on flash) command to save the new

settings on non-volatile Flash memory.

Note: Mexico Config 1 country code is the factory default setting. It is

the setting used if an invalid country value is set, or if a custom profile is

selected that does not exist.

123456

country

second

dial

tone

diagnostic

configuration

country

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 105 106

Pas de commentaire

Avaya R2MFC Guide de configuration Page 46