Avaya Configuring Data Compression Services Manuel d'utilisateur télécharger pdf (Page 50)

Configuring Data Compression Services

A-6 114061 Rev. A

Parameter: Compression Mode

Path: Conﬁguration Manager > Protocols > WCP > Interfaces

Default: Inherit from Line

Options: Continuous Packet

| Packet by Packet | Inherit from Line

Function: Indicates the compression mode on the circuit.

Continuous Packet Compression (CPC) retains compression history across

packets and allows a higher compression ratio than does Packet-by-Packet

Compression (PPC).

PPC resets compression history at the start of each packet, resulting in a lower

compression ratio. Since PPC does not depend on previous packets, you should

select this option for a link that drops a large number of packets.

Inherit from Line allows you to set WCP parameters at the line level and apply

them to circuits. For PPP, with only one circuit per line, this means that you can

conﬁgure WCP at either the circuit level or the line level.

Instructions: Select Inherit from Line if you want to accept the value in effect for the WCP

Compression Mode line parameter. Otherwise, select either Continuous Packet

or Packet by Packet.

MIB Object ID: 1.3.6.1.4.1.18.3.4.22.2.1.4

1 2 ... 45 46 47 48 49 50 51 52 53 54

Pas de commentaire

Avaya Configuring Data Compression Services Manuel d'utilisateur Page 50