Avaya ATM Link Modules and Routing Engines in BN Platforms Manuel d'utilisateur Page 21

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 46
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 20
Installing ATM Link Modules
114951-B Rev 00
1-3
Figure 1-3. Link Module Slots in a BCN Platform
Removing a Link Module
If there are no empty slots in your BN platform, you must remove a link module to
install the ATM link module. When replacing a configured link module, you must
delete all configured circuits (ports) on the slot so the BN platform software can
properly configure the new link module.
Refer to Configuring Routers if you use router software or Administration Guide
if you use BayStream software for instructions on editing a configuration file and
deleting circuits.
The BN hot-swap feature allows you to remove or replace a link module with the
chassis power on or off.
Danger:
Do not remove more than two adjacent modules with the power on.
Po
wer OK
Power
OK
Power OK
Power OK
Link module slots
SRML
QMC0012A
654321
14 13 12 11 10 9 8
Vue de la page 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 45 46

Commentaires sur ces manuels

Pas de commentaire