Avaya Using Technician Interface Scripts Manuel d'utilisateur Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 849
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
Using Technician Interface Scripts
xiv
117380-A Rev. A
Before You Begin
Before using this guide to run Technician Interface commands on a router or
BayStream platform, you must
Install the router or BayStream platform
Use one of the following methods to establish a connection to the router or
BayStream platform:
-- Connect the serial port of an ASCII terminal device (for example, a DEC
VT100) directly to the console port of the router or BayStream platform
-- Connect the serial port of a workstation or PC directly to the console port
of the router or BayStream platform. (Run ASCII terminal emulation
software on the workstation or PC.)
-- Dial in to the console port of the router or BayStream platform from a
workstation or PC running ASCII terminal emulation software. (This
alternative requires one modem locally attached to your workstation or
PC, and another modem locally attached to the console port of the router
or BayStream platform you want to access.)
-- Establish a Telnet (in-band) connection to the router or BayStream
platform
Note:
Before you can access the Technician Interface using Telnet, the router
or BayStream platform must have at least one assigned IP address. Although
there is no limit to the number of Telnet connections that you can make to the
Technician Interface, we recommend that you establish no more than one
Telnet session per router or BayStream platform.
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 848 849

Commentaires sur ces manuels

Pas de commentaire