Avaya DECT Messenger Fundamentals - Communication Server 1000 Manuel d'utilisateur télécharger pdf (Page 109)

eLOCATION Module in eCONFIG

The eLOCATION module is configured through eCONFIG.

Figure 34: eLOCATION module

A number of parameters, for example Site, Area, and so on, are the same for all modules and

therefore, are not explained here. However, the following parameters are new in the

eLOCATION module and require some explanation:

• Location Agent Address

This is the IP address of the DAP Controller (DCC) to which the IP connection is made.

• Location Agent Port

This is the port number on the DAP Controller (DCC) to which the IP connection is made.

The port number must be 28008 for a SIP DECT system.

• General Timeout

Protocol guarding. Always is 10 seconds.

• Retry Count

Retry counter for retrieving information from the DAP Controller. Default = 5.

• Retry Interval

Retry Interval time between retries. Default = 10 seconds.

• Polling Interval

Polling interval is the interval time between poling message to the DCC to check if the

connection is still alive. Default = 60 seconds.

eLOCATION

DECT Messenger Fundamentals March 2012 109

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 167 168

Pas de commentaire

Avaya DECT Messenger Fundamentals - Communication Server 1000 Manuel d'utilisateur Page 109