Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manuel d'utilisateur télécharger pdf (Page 163)

SNMP, BootP, DHCP, and RARP Parameter Descriptions

117362-C Rev 00

A-27

Parameter: Debug Level

Path: Configuration Manager > Protocols > Global Protocols> DHCP Global

Default: 0

Options: 1 to 10

Function: Specifies the debug level messaging you want to display in the log file for the

DHCP server. Normally, only debug messages with a debug level of 0 are

written to the log file.

Instructions: Enter the debug messaging level you want. Specifying a higher debug level

causes additional messages to appear in the log file. Because additional

information can rapidly fill the log file and cause loss of other information,

change the debug level only to resolve critical problems.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.9

Parameter: Local IP Address

Path: Configuration Manager > Protocols > Global Protocols> DHCP Global

Default: 0.0.0.0

Options: Valid IP address

Function: Specifies the IP address that the DHCP server uses to identify itself to the NetID

Server Manager serving this DHCP server.

Instructions: Enter the IP address of the DHCP server. This address must correspond to the

address of an actual local interface configured on the router.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.24.1.1.10

1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 175 176

Pas de commentaire

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Manuel d'utilisateur Page 163