Avaya Configuring BOOTP Services Manuel d'utilisateur télécharger pdf (Page 121)

Customizing BootP

308644-15.1 Rev 00

4-21

Specifying Servers for BootP Services

You can specify a forwarding route for BOOTREQUEST packets by defining a

relationship between an input interface and a BootP server. By defining such a

relationship, you can:

• Improve the efficiency of BOOTREQUEST packet relay.

• Transmit BOOTREQUEST packets through unnumbered output interfaces.

Configuring BootP Preferred Servers

You configure a BootP preferred server by specifying the following:

• IP address of a numbered network interface that you want to receive

BOOTREQUEST or DHCP packets from clients. Do not specify an

unnumbered interface for this parameter.

• IP address of the server that should receive the BOOTREQUEST or DHCP

packet from the relay agent.

The router can then unicast a BOOTREQUEST packet through normal IP services

to that server.

You can use the BCC or Site Manager to configure a BootP preferred server.

Using the BCC

To specify the IP address of the preferred server, go to the BootP interface prompt

(for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; bootp

) and enter:

preferred-server

server-address>

server-address

is the IP address of the preferred server.

9. Click on

Done

. You return to the BOOTP Relay Agent

Interface Table window.

10. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 195 196

Pas de commentaire

Avaya Configuring BOOTP Services Manuel d'utilisateur Page 121