
Requirements Outside the ISP Network
303509-A Rev 00 8-11
6. Enter the
Novell Configured Network
Number
(in hexadecimal notation) of
your Ethernet interface.
This number is the same as the Novell
server external network number when
the server is locally attached to the
same Ethernet segment. For example,
enter 0x00000055 for the network
shown in Figure 8-1
.
7. Configure the other parameters or
accept the defaults in this window, as
appropriate.
8. Make sure that the encapsulation is
correct for the interface you are
configuring. For example, Figure 8-1
shows an Ethernet interface for this
circuit, so ETHERNET_II is the correct
encapsulation type. To see the list of
valid values, click on
Values
or consult
the list that follows this table.
9. Click on
OK
. The Configuration Manager window opens.
10.Edit the IPX Global or Interface
parameters, if necessary, according to
the usual IPX configuration procedures.
11.Choose
File > Exit
and save your
changes.
The Site Manager window opens.
You do this System responds
Commentaires sur ces manuels