Avaya Business Communication Manager 5.0 - Configuration - Devices Manuel d'utilisateur télécharger pdf (Page 76)

76 Telephone relocation

Nortel Business Communication Manager 5.0

Configuration — Devices

NN40170-500 02.04 Standard

August 2009

Keeping an IP telephone active

To keep an IP telephone active after it is disconnected, you must change a

setting in Element Manager.

Procedure steps

Step Action

1 In the Element Manager, go to Configuration > Telephony > Sets > Active

Sets.

2 Click the Capabilities and Preferences tab.

3 Click IP Terminal details.

4 Select the Keep DN alive check box.

Clear the Keep DN alive check box to allow the Direct Number (DN) record

to become inactive if the IP telephone is disconnected.

--End--

IP telephone relocation without changing the DN

To move an IP telephone without changing the DN, complete this procedure.

Procedure steps

Step Action

1 Disconnect the power from the IP telephone or three-port switch.

2 Disconnect the network connection.

3 At the new location, reconnect the network cable and the power connection.

4 If the new location is on a different subnet, you must make the appropriate

changes to the telephone IP addressing; however, do not change the S1 IP

or S2 IP address.

If your network is using partial DHCP, reconfiguration is not required at this

step.

5 Disconnect the power from the IP telephone or three-port switch.

--End--

IP telephone relocation with a changed DN

To move an IP telephone and change the DN, complete this procedure.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 257 258

Pas de commentaire

Avaya Business Communication Manager 5.0 - Configuration - Devices Manuel d'utilisateur Page 76