Avaya Bay Command Console Manuel d'utilisateur télécharger pdf (Page 40)

Using the Bay Command Console (BCC)

2-12

117383-D Rev 00

Example:

box# show config ip/192.168.125.34/255.255.255.224 -r

ip address 192.168.125.34 mask 255.255.255.224

broadcast 192.168.125.32

arp

back

rip

back

Displaying Objects at the Next Subcontext Level

To display by BCC instance identifier any objects configured at the next

subcontext level accessible from your current location in configuration mode, use

the

lso or lso -list (lso -l) commands.

Example:

Display in tabular format a list of objects configured on the current object. Show

the BCC instance identifier of each configured object.

box#

lso

board/1 board/4 dns ip telnet

board/2 board/5 ethernet/2/1 snmp tftp

board/3 console/1 ftp syslog

Example:

Display in nontabular format a list of objects configured on the current object.

Show the BCC instance identifier of each configured object.

box# lso -l

board/1 board/2 board/3 board/4 board/5 ftp snmp tftp console/1

telnet ethernet/2/1 ip dns syslog

Displaying Objects at All Subcontext Levels

To display in hierarchical format the active configuration of the current object and

any other dependent objects configured on the same branch, use the

show config -recursive command.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 139 140

Pas de commentaire

Avaya Bay Command Console Manuel d'utilisateur Page 40