Avaya Bay Command Console Manuel d'utilisateur télécharger pdf (Page 42)

Using the Bay Command Console (BCC)

2-14

117383-C Rev. 00

Displaying the Path to Every Configured Object

To display by BCC instance identifier the path to every object configured at the

next subcontext level, enter the

lso -recursive (lso -r) command from your

current context.

Note that

lso -r intially lists all objects configured at the next subcontext level, and

then displays the detailed path to each of those objects in standard BCC

configuration syntax.

Example

(from root level, BLN router):

box#

lso -r

board/1 board/4 dns ip telnet

board/2 board/5 ethernet/2/1 snmp tftp

board/3 console/1 ftp syslog

box; board/1;

box; board/2;

. . .

box; snmp;

community/public

box; snmp; community/public;

manager/public/0.0.0.0 manager/public/192.32.241.36

box; snmp; community/public; manager/public/0.0.0.0;

box; snmp; community/public; manager/public/192.32.241.36;

. . .

Example

(from an IP interface on ethernet/2/1):

ip/192.168.125.34/255.255.255.224#

lso -r

arp/192.168.125.34/1 rip/192.168.125.34

box; ethernet/2/1; ip/192.168.125.34/255.255.255.224; arp/192.168.125.34/1;

box; ethernet/2/1; ip/192.168.125.34/255.255.255.224; rip/192.168.125.34;

Note:

The BCC displays the same output as show config -all when you enter

show config -recursive at root level in configuration mode.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 129 130

Pas de commentaire

Avaya Bay Command Console Manuel d'utilisateur Page 42