Avaya 1000 Series Video Conferencing Systems Guide d'installation télécharger pdf (Page 24)

Configure H.323 video endpoints on Communication Manager 6.0

AVTS R 6.0 Quick Setup For feedback, use doc[email protected] August 2010

Use the add signaling-group command to add a signaling group for the

gatekeeper. Set the following parameters:

● Group Type: H.323

● IP video: y

● Priority video. If you want all incoming calls to receive priority video

transmissions, select y

● Near-end Listen Port: 1719

● LRQ Required: y

● Far-end Node Name to the name you entered for the gatekeeper in Step 3.

● Far-end Listen Port: 1719

● Far-end Network Region to the IP network region you specified in Step 2.

● Direct IP-IP Audio Connections: y

● IP Audio Hairpinning: y

Use the add trunk-group command to add a trunk group for the gatekeeper. Set the

following parameters:

● Group Type: ISDN

● Carrier Medium: IP

● Add members to this trunk group

Use the change signaling-group n command (where n is the signaling group

you added in Step 4) to set Trunk Group for Channel Selection to the trunk group you

added in Step 5.

Create a route pattern to the gatekeeper.

Configure the gatekeeper.

Table 11: Administering Polycom PathNavigator/ CMA Gatekeepers

1 2 ... 19 20 21 22 23 24 25

Pas de commentaire

Avaya 1000 Series Video Conferencing Systems Guide d'installation Page 24