Avaya Configuring IP Multicasting Services Manuel d'utilisateur Page 91

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 103
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 90
Site Manager Multicast Parameters
114064 Rev. A A-17
IP Configuration Parameters
Parameter: Max Host Response Time
Path: Configuration Manager > Protocols > IP > Multicast > IGMP > Entry
Default: 100 tenths of a second
Options: 1 to 100 tenths of a second
Function: Specifies a maximum value for the amount of time that a host must wait before
responding to a query. IGMP places this value in the code field of an IGMP
query.
Instructions: Specify a maximum response time value for this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.13.2.1.15
Parameter: IP Address
Path: Select IP from the Select Protocols window and click on OK.
Default: None
Options: 0.0.0.0 or any valid IP address
Function: Assigns a 32-bit IP address to the interface.
Instructions: Enter the IP address of the interface in dotted decimal notation. Enter 0.0.0.0 to
configure an unnumbered interface on the circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.4
Parameter: Subnet Mask
Path: Select IP from the Select Protocols window and click on OK.
Default: None
Options: The Configuration Manager automatically calculates an appropriate subnet
mask, depending on the class of the network to which the interface connects.
However, you can change the subnet mask with this parameter.
Function: Specifies the network and subnetwork portion of the 32-bit IP address.
Instructions: Either accept the assigned subnet mask or enter another subnet mask in dotted
decimal notation. Enter 0.0.0.0 if you are configuring an unnumbered interface
on the circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.2.1.4.1.6
Vue de la page 90
1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 102 103

Commentaires sur ces manuels

Pas de commentaire