Avaya BayStack ARN Routers Manuel d'utilisateur télécharger pdf (Page 52)

Installing and Operating BayStack ARN Routers

1-30

114200-C Rev 00

Connecting an External Console Modem

To connect an external modem to the ARN back panel, you need an AT or Hayes

compatible modem and the modem cable (Order No. 110307) that came in the

ARN console/modem cable kit.

Complete the following steps:

Configure the modem, using the parameters in Table 1-4.

Refer to the modem user guide for instructions.

Turn off the modem.

Insert the 9-pin receptacle end of the modem cable into the ARN Console

interface (Figure 1-23)

Insert the 25-pin plug at the other end of the modem cable into the

modem RS-232 data communications interface

Figure 1-23. Connecting an External Console Modem

Note:

Do not use the null modem crossover adapter (Order No. 110308) in the

ARN cable kit to connect to a modem.

PHONE

DWR

(LEASE

3810

(LEASED)

3810

NMS DTE

DIAL

Modem cable

ARN0057

Console

100-240~

1.2A

50-60Hz

Redundant Power

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 161 162

Pas de commentaire

Avaya BayStack ARN Routers Manuel d'utilisateur Page 52