Avaya BayStack ARN Routers Manuel d'utilisateur télécharger pdf (Page 24)

Installing and Operating BayStack ARN Routers

1-2

114200-C Rev 00

Preparing to Install the ARN

Verify the following before beginning the installation, as explained in the sections

that follow:

• Your shipment is complete and undamaged.

• You have the proper equipment and tools.

• Your installation site meets physical, electrical, and environmental

requirements.

• You have the communications devices and the cabling that you need to attach

to the ARN.

Verifying Shipment Contents

You should inspect all items for shipping damage. If you detect any damage, do

not install the ARN. Call the Bay Networks Technical Solutions Center in your

area, as described in “How to Get Help.”

In addition to the ARN and this guide, your shipping container should contain

several other hardware accessory items. Verify that the items in the shipping

container match those on the packing list affixed to the shipping container.

Refer to the following checklist when verifying the contents of the shipping

container:

__ One power cable for connecting the ARN to a wall outlet.

__ One console/modem cable kit (Order No. 110310) for connecting an optional

local console or modem. The console/modem cable kit contains one 15-foot

AT standard molded serial cable (with DB-9 receptacle to DB-25 plug

connectors) and one null modem crossover adapter (with DB-25 to DB-25

receptacle connectors).

__ Two flange brackets, eight #6 Phillips screws, four #10 cagenut screws and

washers, and four cage nuts for rack-mounting the ARN.

___Four rubber feet for table-top operation.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 161 162

Pas de commentaire

Avaya BayStack ARN Routers Manuel d'utilisateur Page 24