Avaya Configuring PPP Services Manuel d'utilisateur Page 74

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 140
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 73
Configuring PPP Services
3-20 117360-A Rev. A
Specifying the Acceptable Level of Echo-Reply Packet Loss
The Echo-Reply Acceptable Loss parameter specifies the maximum number of
unacknowledged echo-request packets that the router will transmit before
declaring the point-to-point link down. The default value is 3 packets.
Using the BCC
Navigate to the line prompt for the circuit and enter
echo-replies-lost
seconds
For example, the following command sets the number of acceptable packets lost
to 5 seconds on circuit 3/1.
line/3/1# echo-replies-lost 5
Using Site Manager
To set the interval between transmissions of echo-request packets on this
interface, do the tasks in the following table.
4. Set Seconds between Xmit of
Echo-Request. (See page A-15.)
5. If you have no other PPP line parameters
to configure, click on OK. Otherwise,
continue with the Lines configuration.
The Interfaces window opens.
Site Manager Procedure
You do this System responds
1. From the Protocols menu, choose PPP. The Interfaces menu appears.
2. Choose Interfaces. The Interfaces window opens.
3. Choose Lines. The Lines window opens.
Site Manager Procedure
(continued)
You do this System responds
Vue de la page 73
1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 139 140

Commentaires sur ces manuels

Pas de commentaire