Site Manager Parameters
117355-D Rev 00
A-15
Parameter: Report Depend Probe
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: Disable
Options: Enable
|
Disable
Function: Specifies the conditions under which DVMRP accepts a route report.
According to the protocol, DVMRP must send a probe packet before sending
the route report packet to its neighbors. Some vendor implementations,
however, do not send probes before sending reports.
Instructions: By default, DVMRP processes all received route reports. Enable this feature if
you want DVMRP to process only routes received from neighbors that have
sent probe packets in accordance with the protocol.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.28
Parameter: Prune Life Time
Path: Configuration Manager > Protocols > IP > DVMRP > Tunnel
Default: 7200
Options: 0 to 86,400 (seconds)
Function: Specifies (in seconds) the lifetime of a prune message that DVMRP sends to a
neighbor on this tunnel.
Instructions: Set this parameter from 0 through 86,400 seconds (24 hours). The default,
7200 seconds, is equal to 2 hours.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.3.1.29
Commentaires sur ces manuels