Avaya Business Secure Router 252 Configuration - Basics Manuel d'utilisateur télécharger pdf (Page 77)

100

101

Chapter 4 User Notes 77

Nortel Business Secure Router 252 Configuration — Basics

Scenario 2: A BCM50 in each site, each acting as the backup call

server for the other site

1 At each site,

a Ensure that the DHCP Server in the BCM50 is disabled, that the BCM50

is connected to the router, and both have booted.

b Add the IP phones to the site as per BCM50 installation guide.

c At each router, change the S2 address to the IP address of the remote

BCM50, using TELNET or SSH, and the CLI command,

ip dhcp enif0 server voipserver 2 <Remote_BCM50_IP_Address> 7000 1

2 Create a tunnel between the sites, as described above.

3 Create an H.323 trunk between the BCM50s, as per the BCM50 User Guide.

Configuring the router to act as a Nortel VPN Server (Client

Termination)

1 Under VPN / Client Termination,

a Enable Client Termination.

b Select authentication type and the encryption algorithms supported.

c If the clients are assigned IP addresses from a pool, define the pool, and

enable it.

2 Assuming a Local User Database is used for authentication,

a Add user name and password to the local user database as an IPSec user,

and activate it. If the hosts will be assigned a static IP address, enter the

address that will be assigned to the user.

Configuring the router to connect to a Nortel VPN Server (Client

Emulation)

1 Go to VPN / Summary, and select 'Edit'.

2 Select a connection type of Contivity Client, and fill in the web page with the

relevant data.

3 If Group authentication or On-Demand Client Tunnels are needed, click the

'Advanced' button to configure this.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 459 460

Commentaires sur ces manuels

Pas de commentaire

Avaya Business Secure Router 252 Configuration - Basics Manuel d'utilisateur Page 77

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Avaya Business Secure Router 252 Configuration - Basics