Avaya BCM50 Manuel d'installation Page 114

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 280
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 113
114 Chapter 9 Connecting the cables to the BCM50 system
NN40020-302
4 Use a small slotted screwdriver to unscrew the wire hole screws on top of the terminal block.
5 Insert the bare wire ends (6 mm or 0.25 in.) in the appropriate holes on the sides of the
terminal block.
6 Tighten the screws to hold the wires in place.
7 Reinstall the terminal block on the patch panel.
8 Connect the wires (digital telephones, analog telephones, and analog trunks) to the patch
panel.
9 Connect cables to the main unit as required.
Next step
After you connect the cables to the BCM50 system, you can configure the initial parameters. For
information about configuring these parameters, see Installing telephones and peripherals on page
115.
Vue de la page 113
1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 279 280

Commentaires sur ces manuels

Pas de commentaire