Avaya Reference for BCC IP show Commands (308603-14.20 Rev 00) Manuel d'utilisateur télécharger pdf (Page 37)

BGP show Commands

308603-14.20 Rev 00

2-3

show /jointfilesconvert/92786/bgp errors

The

show bgp errors

command displays error messages generated the last time

that a connection between a router and its BGP peer failed. These messages were

either received from or sent to the BGP peer. The output includes the following

information:

show /jointfilesconvert/92786/bgp peers

The

show /jointfilesconvert/92786/bgp peers

command displays information about all BGP peers. The

output includes the following information:

Local Address IP address of the local interface.

Remote Address IP address of the peer.

Last Error Code Last error code and subcode seen by this peer on this

connection. If no error occurred, the value of this field is 0.

Otherwise, the first byte of this 2-byte octet string

contains the error code; the second contains the

subcode.

Last error source Last error source seen by this peer on this connection.

Local Address/Port The local interface address and TCP port number.

Remote Address/Port The peer’s IP address and TCP port number.

Remote AS Number of the autonomous system (AS) in which the

remote peer is located.

Peer Mode Route server mode of the BGP peer:

• 1 -- not a route server connection.

• 5 -- peer is a route reflector client.

• 6 -- peer is a route reflector in the same RR cluster.

• 7 -- peer is a route reflector in a different RR cluster.

State Current state of the BGP peer: up, down, init (initializing),

invalid, or not pres (enabled but not yet started).

BGP Ver The version of BGP that the BGP peers use to exchange

routing information (BGP3 or BGP4).

Routes Total number of BGP routes received from the peer.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 77 78

Pas de commentaire

Avaya Reference for BCC IP show Commands (308603-14.20 Rev 00) Manuel d'utilisateur Page 37