Avaya Redundancy BCM Rls 6.0 Manuel d'utilisateur télécharger pdf (Page 7)

Redundancy

NN40011-048 Issue 1.2 BCM450 Rls 6.0 7

Flowchart

This flowchart depicts the steps necessary to upgrade a BCM 450 with a

redundancy kit and RAID kit.

Prepare the BCM 450 for upgrade: Refer to the Preparing the BCM

450 for Redundancy Kit Installation section of this guide

Check that you have the required components to install: Refer to the

Installing the Redundancy & RAID Kit section of this guide

Install a Secondary Fan and Faceplate: Refer to the Installing the

Secondary Fan and Faceplate section of this guide

Check that the RAID service is enabled: Refer to the Enabling the

RAID Service after Upgrade section of this guide

Install a Redundant Power Supply: Refer to the Installing the

Redundant Power Supply section of this guide

Install a Secondary Hard Disk Drive: Refer to the Installing the

Secondary Hard Disk Drive section of this guide

Check that you meet the Requirements for upgrading the BCM with a

Redundancy or RAID Kit: Refer to the Overview section of this guide

1 2 3 4 5 6 7 8 9 10 11 12 ... 32 33

Pas de commentaire

Avaya Redundancy BCM Rls 6.0 Manuel d'utilisateur Page 7