Avaya 4400-Series Manuel d'utilisateur

1CIB 3199Comcode 108787698Issue 2, November 2000Wall-Mounting Stand for 4400-Series Telephonesand 4600-Series IP TelephonesIMPORTANTSAFETYINSTRUCTIONS

104. After you have attached the stand to the 4612/4624 IP telephone, use the screw provided totighten the stand onto the back of the telephone set.5.

119. Place the 4612/4624 IP telephone against the wall so that the studs on the mounting plateenter the keyholes in the stand. Then pull the telephone

12

2Pre-Installation ChecklistYou can mount all the 4400-Series and 4600-Series telephones except the 4424LD+ on a wall by using theappropriate small or

3Small Stand Wall-Mounting InstructionsWall Mounting the 4400-SeriesTelephoneFollow these steps to wall mount a small stand to a 4400-Series telephone

44. Push down on the stand toward the top of the telephone, and push the tab on the thinner endof the stand into the slot at the top of the 4400-Serie

5Wall-Mounting the 4606 IP TelephoneFollow these steps to attach the small stand to a 4606 IP telephone:Before you assemble the stand, you must have a

64. Plug the telephone’s foot-long CAT 5 line cord into the primary Ethernet line interface jack(identified by an icon that looks like a modular wall

7Large Stand Wall-Mounting InstructionsWall Mounting the 4400-SeriesTelephoneFollow these steps to wall mount a large stand to the 4400-Series telepho

84. Push down on the stand toward the bottom of the telephone, and push the tab on the thinnerend of the stand into the slot at the top of the 4400-Se

9Wall-Mounting the 4612/4624 IP Telephone with a Large StandFollow these steps to attach the large stand to a 4612 or 4624 IP Series telephone:Before