Avaya FE1/E1 Manuel d'utilisateur télécharger pdf (Page 22)

FE1/E1 Adapter Module

Supplement

302702-A Rev. 00

Figure 4. Cable Connection for the E1/FE1 WAN Adapter Module

Connect the other end of the cable to the E1 communication device.

See the Bay Networks

Cable Guide

Verifying the Installation

After reconnecting the router to the network, verify the installation by checking

the diagnostic LEDs on the base module. See

Installing a WAN Adapter Module in

a BayStack ARN Router

Installing a WAN Adapter Module in a BayStack AN or

ANH Router

for base module LED descriptions.

E1/FE1 WAN Adapter Module LEDs

The E1/FE1 WAN adapter module has four LEDs.

On ARN, AN, and 12-port ANH routers, the LEDs are to the right of the RJ-48C

connector (see Figure 4). On the 8-port ANH router, the LEDs are to the left of the

connector (see Figure 3

). The LEDs are identical in label, color, and function on

each platform.

Table 1

describes the function of each E1/FE1 LED.

Local Alarm

E1/FE1

G.703

Remote Alarm

Loop

Sync

AN0125B

1 2 ... 17 18 19 20 21 22 23 24

Pas de commentaire

Avaya FE1/E1 Manuel d'utilisateur Page 22