Avaya Hardware Compression Net Modules in ASN Platforms Manuel d'utilisateur télécharger pdf (Page 33)

Installing a Net Module

115374-A Rev. A 1-11

Replacing the Component Tray

Before you replace the component tray, remove the alligator clip of the antistatic

strap from the chassis. Then remove the antistatic wrist strap from your wrist.

To replace the component tray:

1. Gently slide the tray into the chassis.

2. Use a Phillips screwdriver to tighten the two captive screws that fasten

the tray to the chassis (refer to Figur

e 1-1).

3. Reattach the cables to the proper connectors on the back panel.

See Chapter 2 for information about the LEDs on the net module.

1 2 ... 28 29 30 31 32 33 34 35 36

Pas de commentaire

Avaya Hardware Compression Net Modules in ASN Platforms Manuel d'utilisateur Page 33