Avaya Digital Enchanced Cordless Telecommuncations SIP DECT Fundamentals Manuel d'utilisateur télécharger pdf (Page 77)

Single and multiple floor deployment 77

Figure 45

Multi-cell distance

Procedure 16

Multi-cell deployment

Step Action

1 Choose a position on the floor plan for the cell center that meets

the following requirements.

a is furthest from the critical points and still provides good audio

quality at the critical point,

b complies with the “Rules and guidelines to locate cell centers”

(page 35), and

c is in the coverage area.

2 Place the deployment tool at critical point P1.

3 Establish a link.

4 Walk briskly into the coverage area away from the critical point

until the cell boundary is reached.

5 Mark a small X on the floor plan where the cell boundary is

found.

6 Repeat step 4 and 5 several times, walking in different directions

from the critical point to establish an arc. The arc is at the cell

boundary and is within range of the critical point.

7 Draw a thin contour line to mark an arc through the Xs on the

floor plan.

8 Repeat steps 4 through 7 walking into the coverage area of

critical point P2.

9 Locate the cell center on the arc along a line from the critical

point that is equal distant from the adjacent walls.

Nortel Communication Server 1000

SIP DECT Fundamentals

NN43120-123 01.07

6 January 2009

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 253 254

Pas de commentaire

Avaya Digital Enchanced Cordless Telecommuncations SIP DECT Fundamentals Manuel d'utilisateur Page 77