Avaya Connecting ASN Routers and BNX Platforms to a Network Manuel d'utilisateur télécharger pdf (Page 61)

Configuring Network Booting

3-11

Netboot Interface Parameters

Parameter: Slot Number

Default: None

Range: 1 to 4

Function: Speciﬁes the assigned slot number for the physical slot in which the net

module for this connector is installed.

Instructions: Type the appropriate slot number in the Slot Number box.

MIB Object ID: None

Parameter: Module Number

Default: None

Range: 1 to 4

Function: Speciﬁes which net module supports the connector.

Instructions: Type the appropriate module number in the Module Number box.

MIB Object ID: None

Parameter: Connector

Default: None

Options: COM1

| COM2 | XCVR1 | XCVR2

Function: Identiﬁes the connector conﬁgured as a Netboot interface.

Instructions: Enter the connector name for the Netboot interface. To use Netboot over a

synchronous interface, enter COM1 or COM2. To use Netboot over an

Ethernet interface, enter XCVR1 or XCVR2.

MIB Object ID: None

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 105 106

Pas de commentaire

Avaya Connecting ASN Routers and BNX Platforms to a Network Manuel d'utilisateur Page 61