Avaya Bay Command Console BCC Manuel d'utilisateur télécharger pdf (Page 38)

Using the Bay Command Console (BCC)

2-10

303562-A Rev. 00

Displaying the Configuration of One Object

To view objects configured within a specific part of the BCC configuration tree,

enter the

show config

command or the

lso

command.

Example:

To view the configuration of a specific configured object, navigate to the object

and enter the

show config

command. The following example shows all objects

configured on

ethernet/2/1 of a BLN router:

box#

eth 2/1

ethernet/2/1#

show config

ethernet slot 2 connector 1

circuit-name E21-alpha

ip address 192.168.125.34 mask 255.255.255.224

broadcast 192.168.125.32

arp

back

rip

back

Example:

You can also enter the

lso

command to view any instances of objects configured at

your current location in the active device configuration, as follows:

ip/192.168.155.151/255.255.255.0#

lso

arp/192.168.155.151/1 rip/192.168.155.151

Use the

lso

command if you have no need to display the contents of the current

object in full BCC configuration syntax.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 103 104

Pas de commentaire

Avaya Bay Command Console BCC Manuel d'utilisateur Page 38