Avaya Configuring Differentiated Services Manuel d'utilisateur télécharger pdf (Page 29)

Starting Differentiated Services

308620-14.00 Rev 00

2-3

Enabling Differentiated Services

To enable a differentiated services interface, complete the following tasks:

Choosing A Filter Mechanism

In addition to enabling a differentiated services interface, you must select a

mechanism for installing filters on the router. The router uses filters to determine

which packets it should mark for special treatment through the network. You can

either enable the COPS protocol or manually configure filters.

Go to one of the following sections to choose a filter mechanism:

• Enabling COPS on page 2-4

• Enabling Static Filters on page 2-5

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

click on an IP interface connector.

The Add Circuit window opens.

2. Accept the default circuit name or enter a

new name, then click on

The Select Protocols window opens.

3. Scroll through the list of protocols, and

choose

DiffServ

, then click on

The IP Configuration window opens.

4. Enter the router’s IP address in the

Address

field, then click on

. See

Configuring IP, ARP, RIP, and OSPF

Services

for a parameter description.

The DiffServ Interface List window opens.

The interface is now enabled.

5. Click on

Done

. You return to the Configuration Manager

window.

Note:

The router does not allow IP traffic filters on a differentiated services

interface. If you add differentiated services to an interface that already has IP

traffic filters configured, the router will remove them.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

Avaya Configuring Differentiated Services Manuel d'utilisateur Page 29

Commentaires sur ces manuels

Produits connexes et manuels pour Manuels des logiciels Avaya Configuring Differentiated Services