Avaya Configuring Data Encryption Services Manuel d'utilisateur télécharger pdf (Page 60)

Configuring Data Encryption Services

A-4

303520-A Rev. 00

WEP Line Parameters

Parameter: Enable

Path: Configuration Manager > Protocols > WEP > Lines

Default: Enable

Options: Enable | Disable

Function: Enables or disables encryption on this line. Defaults to Enable only if you select

WEP in the Protocols menu.

Instructions: Accept the default, Enable, to use encryption on this line. Remember to enable

either the PPP or frame relay Encrypt Enable parameter also.

MIB Object ID: 1.3.6.1.4.1.18.3.4.28.1.1.2

Parameter: Cipher Mode Mask

Path: Configuration Manager > Protocols > WEP > Lines

Default: DES (40 bit keys)

Options: DES (40 bit keys) | DES (56 bit keys) | Both

Function: Determines whether this line uses 40-bit or 56-bit encryption.

Instructions: Accept the default DES, at 40 bit keys, unless you have the strong encryption

option (SEO) that enables you to use 56-bit encryption. Select the Both option if

you have 56-bit encryption and don’t know the value on the other side of the

link. If you select Both, the link uses 56-bit encryption if both sides support it; if

not, it uses 40-bit encryption.

The Site Manager screen displays the value of this parameter in hexadecimal

notation:

0x 10000000 = 56-bit encryption

0x 20000000 = 40-bit encryption

0x 30000000 = Both

MIB Object ID: 1.3.6.1.4.1.18.3.4.28.1.1.5

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 69 70

Pas de commentaire

Avaya Configuring Data Encryption Services Manuel d'utilisateur Page 60