Avaya Configuring BayStack Remote Access Manuel d'utilisateur télécharger pdf (Page 43)

Setting Up a UNIX Boot Server

117341-B Rev. 00

2-3

The AIX and HP-UX operating systems include BootPD. SunOS and Solaris

not include BootPD, so Site Manager automatically installs BootPD on Sun

workstations running these operating systems.

Copy the bootpd file to the /etc directory as follows:

root

Enter the following command:

cp /usr/wf/bin/bootpd /etc

Setting Up BootPD to Run

To configure your workstation to run BootPD when it receives a BootP request

packet:

root

, use a text editor to open the

/etc/inetd.conf

file.

Make sure that no other line in the file begins with “bootps.”

If there is such a line, your workstation is already configured as a BootP

server. Comment out this line by typing a pound sign (#) at the beginning of

the line so that the server will use the BootPD program that you specify in the

next step.

Insert the following line anywhere in the file to configure your

workstation as a BootP server:

bootps dgram udp wait root /etc/bootpd bootpd

Save and exit the file.

Setting Up BootPD to Respond to BayStack Routers

When the operating system receives a BootP request packet, it starts BootPD.

BootPD matches the source IP address of the packet to an IP address in its BootP

table (bootptab file) to determine the path names of the requested startup files.

Entries in bootptab also include optional parameter tags. Bay Networks supplies a

sample bootptab file that Site Manager installs automatically in the /usr/wf/config

directory. Use a copy of this sample file if you do not already have a bootptab file.

Note:

The bootptab file can include the same path name for all booting

routers, or a different path name for each IP address.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 137 138

Pas de commentaire

Avaya Configuring BayStack Remote Access Manuel d'utilisateur Page 43