Avaya Media Processing Server Series System (Software Release 2.1) Manuel d'utilisateur télécharger pdf (Page 253)

Configuration Procedures and Considerations

# P0602477 Ver: 3.1.11 Page 253

2. Cycle the power on the TMS. The ROM banner and the current settings

will be displayed on the serial console. Press any key within 5 seconds to

suspend the system from booting.

3. Verify that the Watchdog timer is DISABLED.

4. If displayed values are all correct, select (C)ontinue option by typing

c. To modify any current settings:

a. Select (M)odify option by typing ‘m’:

b. Press <R

ETURN> to accept current values of items to remain

unchanged.

DCC-2000 Rom Version V2.0, Checksum = 0x0187f210

dcc_rom.elf, Release 1.0.0.14 [05/17/99 06:35:25 PM]

--------------------------------------------------------------------------

STARTUP MODE:

Run Application

NETWORK INTERFACE PARAMETERS:

TMS is present

Use Message Exchange to download image

IP address on LAN is 192.168.101.5

HARDWARE PARAMETERS:

Serial channels will use a baud rate of 9600

This board's Ethernet hardware address is 00:80:01:A0:00:96

This board's clock frequency is 40 MHz

This board has 16 Megabytes of DRAM

SOFTWARE WATCH DOG TIMER STATUS:

The watch dog timer is DISABLED and will NOT timeout.

MXD BOOT LOADER PARAMETERS :

The download file will come from the TMS

STARTUP DELAY:

Will wait 5 seconds before start up to allow parameter modifications

--------------------------------------------------------------------------

To change any of this, press any key within 5 seconds

(M)odify any of this or (C)ontinue? [M] m

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 305 306

Pas de commentaire

Avaya Media Processing Server Series System (Software Release 2.1) Manuel d'utilisateur Page 253