Avaya Configuring APPN Services Manuel d'utilisateur Page 89

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 154
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 88
Editing APPN Parameters
114049 Rev. A 3-25
Parameter: Max Receive BTU Size
Default: 2057
Range: 256 to 4105
Function: Specifies the maximum Basic Transmission Unit (BTU) size that this
network node can receive. Each link station determines its own maximum
BTU size based on local node definitions and exchange identification
(XID) information received from the interface and the adjacent link
station.
Instructions: Enter a number in the range 256 to 4105 that the node can handle.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.3.1.9
Parameter: Max Send BTU Size
Default: 2057
Range: 256 to 4105
Function: Specifies the maximum Basic Transmission Unit (BTU) size that can be
sent over this port. Each link station determines its own maximum send
BTU size based on local node definitions and exchange identification
(XID) information received from the interface and the adjacent link
station.
Instructions: Enter a number in the range 256 to 4105. For Ethernet networks, the
maximum send BTU size should be less than or equal to 1500. For
synchronous media, the maximum send BTU size should be less than or
equal to the synchronous maximum transmission unit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.3.1.24
Parameter: Max I-Frame Window
Default: 7
Options: A numeric value not exceeding 127
Function: Specifies the maximum number of information frames (I-frames) that the
local network node can receive before it sends an acknowledgment.
Instructions: Enter a number in the range 1 to 127.
MIB Object ID: 1.3.6.1.4.1.18.3.5.14.1.3.1.10
Vue de la page 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 153 154

Commentaires sur ces manuels

Pas de commentaire