Avaya BCM450 Guide de configuration télécharger pdf (Page 8)

AAA; Reviewed:

03/19/2010

Avaya BCM Solutions Test Lab

Application Notes

Reserved.

8 of 12

BCM50_BCM450_R5_Configuration_Verizon

2010-00000227 Page 8 of 12

5.1.3 SIP Proxy Configuration

1. Under Configuration

Resources

Telephony Resources: Select module type “IP Trunks” and

click on the

“SIP Proxy” tab

2. In the SIP Proxy section:

•

Domain: Set this field to the IP address of the Session Border Controller. Obtain this information

from Verizon.

•

Route all calls using proxy: This field must be checked

•

MCDN Protocol: None

3. Click on the Add button to configure the BCM with identity of the outbound SIP Proxies

4. In the Add Proxy Server dialog box, configure the fields as follows:

• Name:

• IP Address:

• Port:

• Load-balancing weight:

• Keep alive:

5. Repeat step 4 above for each additional outbound SIP Proxy

5.1.4 SIP Media Parameters Configuration

1. Under

Configuration

Resources

Telephony Resources: Select module type “IP Trunks” and click

on the SIP Media Parameters tab.

In the Preferred Codecs section, configure G.729, G.711-aLaw as the first and second

preferred codec respectively.

In the codec Settings section, uncheck Enable Voice Activity Detection.

In the codec Settings section, select 20ms as the payload size for both G.729 and G.711

5. Again in the codec Settings section set G.711 as the Fax transport.

6. Force G.711 for 3.1KHz audio must be checked.

7. Provide in-band ringback must be left unchecked.

5.2 Configuring Analog Sets

1. Under Configuration

Telephony

Sets

Active Sets, click on the Capabilities and Preferences

tab

2. Click on the DN of the first analog set

In the Capabilities tab that shows up at the bottom, configure this analog device to receive short tones by

checking the checkbox next to Receive Short Tones.

Repeat Steps 2 to 3 for each of the analog DNs

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire

Avaya BCM450 Guide de configuration Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Avaya BCM450