Avaya BCM450 Manuel d'utilisateur télécharger pdf (Page 11)

Media Bay Modules

NN40011-003 Issue 1.2 BCM450 Rls 6.0 11

Analog Station Media Bay Modules

The Analog Station Media Bay Modules (ASM, ASM8, ASM8+, and GASM8)

can connect to a maximum of eight analog telecommunication devices. These

devices are standard analog telephones, cordless telephones, fax machines,

answering machines, or modems.

In addition to ASM8 features, the ASM8+ and GASM8 offer the following

features:

 Visual Message Waiting Indicator (VMWI) — LED indicates that a

message is waiting.

 Disconnect supervision (Open Switch Interval [OSI] as per EIA/TIA

464). Indicates to the attached device, in an established

communication, that the connected device should release the call

 Caller ID — provides the name, phone number, and other information

about the caller to the end user telephone at the start of the call.

 Firmware downloading capability — allows the system to upgrade the

ASM8+ and GASM8 firmware.

 Enhanced ringing capability — ASM8+ and GASM8 provide a ringing

voltage of 2 REN/65 V rms per port.

 Calling line identification (CLID)

 The GASM8 is designated as an ONS (on-premise station) port.

Note: Due to power constraints, a maximum of 2 GASM MBM’s are supported

in the main unit. Up to 4 GASM units can be installed in the expansion unit.

4x16 Media Bay Module

The 4x16 MBM provides both analog trunk and digital telephone connections.

The 4x16 MBM provides connections for four analog lines and 16 digital

telephones. Each of the four analog lines support caller ID and disconnect

supervision. An auxiliary port next to the Line 1 port enables you to use an

analog telephony device, such as a modem, fax, or telephone, to share the

trunk.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Pas de commentaire

Avaya BCM450 Manuel d'utilisateur Page 11