Avaya BCM50 Guide de l'utilisateur télécharger pdf (Page 15)

Contents 15

Avaya BCM50 and BCM450 Imaging Tool — User Guide

• Ensure that there are 11 partitions.

8 Select Safely Remove Hardware from the PC task bar and remove the hard drive from the

USB enclosure or adapter.

9 Insert the hard drive into the BCM using the normal FRU replacement procedure for your

platform.

10 Power on the BCM.

The BCM boots up with all the factory default settings and therefore does not have the

previous configuration that was applied to the system, if any was applied previously. You can

now restore the configuration.

Restarting the Avaya BCM

1 If you removed the Avaya BCM from the rack or wall, replace it.

2 Plug the Avaya BCM and the expansion unit, if there is one, into the AC power source.

The Avaya BCM automatically starts booting.

The reboot can take several minutes to complete.

Note: Plug in the expansion unit immediately after plugging in the Avaya BCM to

ensure synchronization between the two units.

1 2 ... 10 11 12 13 14 15 16

Pas de commentaire

Avaya BCM50 Guide de l'utilisateur Page 15